NSI Industries Tork SSA200R-24 Lighting Control with Photo/Override Input Control Time Switch, 24 VAC/24 VDC 50/60 Hz Input Supply, SPDT Output Contact

NSI Industries Tork SSA200R-24 Lighting Control with Photo/Override Input Control Time Switch, 24 VAC/24 VDC 50/60 Hz Input Supply, SPDT Output Contact
NSI Industries

New!: $152.31 $145.06 (as of 04/04/2014 13:45 PST)

Photo Detectors

This NSi Industries SSA200R-24 digital timed switch accepts 24 VAC or 24 VDC input and its SPDT output contacts can activate a one amp load. This timer includes eight timed On settings from ten minutes to eight hours with an automatic Off and warning signal before Off. A digital display indicates time status. The single-pole double-throw (SPDT) contacts are housed within a single-gang in-wall switch that is suitable for indoor use and is Underwriter Laboratories (UL) Listed and Canadian Standards Association (CSA) certified for quality assurance. This switch is suitable for controlling lighting and fans.

Specifications

Switch type	Digital timer with eight timed settings and automatic Off
Input power supply	24 VDC or 24 VAC, 50/60 Hz
Output contacts	SPDT contacts, one amp load rating
On/off control	10, 20, 40 minutes or 1, 1-1/2, 2, 4, or 8 hours with an automatic Off
Enclosure	Single-gang in-wall, indoor use
Terminal wire size range	#18 AWG (American wire gauge)
Operating temperature range	0 to +100 degrees F (-17 to +37 degrees C)
Standards met	UL Listed, CSA certified

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #21609 in BISS
• Brand: NSI Industries
• Model: SSA200R-24
• Number of items: 1

• Selectable timed On cycle for use with fans and lights
• Eight timed On settings from ten minutes to eight hours, warning tone before Off
• 24 VAC or 24 VDC input voltage for multiple uses
• Digital display to indicate status
• Single-gang in-wall enclosure for indoor use