Tork DLC400BP 4 Zone Lighting Control Time Switch, 120/208-240/277 VAC 50/60 Hz Input Supply, SPDT Output Contact

Tork DLC400BP 4 Zone Lighting Control Time Switch, 120/208-240/277 VAC 50/60 Hz Input Supply, SPDT Output Contact
by NSI Industries

New!: $1,868.17 $1,081.00
2 Used! | New! from $1,081.00

Photo Detectors

This NSi Industries DLC400BP digital time switch and photocontrol accepts 120/208-240/277 VAC input and can activate a 30 amp load in each of the four zones (illuminated areas). The switch automatically detects the input voltage and does not require manual voltage setting. The remote photocell (included) turns on lighting when the ambient light level drops below a user-selectable level (between 1 and 100 foot candles) and turns lighting off when the light exceeds that level. A three-position setting for each zone sets the combination of light and time used to control that zone. The timer includes 99 set points per day with a minimum on/off cycle of one minute and is suitable for individualized daily operation. The single-pole double-throw (SPDT) contacts are housed within a metal enclosure that meets NEMA-3 standards for water resistance and has a lockable hasp. The enclosure is suitable for both indoor and outdoor use and mounts to an external surface. This mechanical timer is Underwriter Laboratories (UL) listed and Canadian Standards Association (CSA) certified for quality assurance and is suitable for controlling lighting for open office zones, hallways, signage, and parking lots.

Specifications

Switch type	Digital 24-hour timer with 99 set points each day
Input power supply	120/208-240/277 VAC, 50/60 Hz, 30 W power consumption, battery backup, automatic voltage detection
Output contacts	SPDT contacts, 30 amp load rating
On/off control	One-minute minimum on/off cycle, up to 99 cycles per 24 hours. Photocell operation at 1 to 100 foot candles (fc)
Enclosure	NEMA-3 metal enclosure, indoor/outdoor use, external surface mount
Terminal wire size range	#10 to #14 AWG (American wire gauge)
Operating temperature range	-40 to +158 degrees F (-40 to +55 degrees C)
Standards met	UL Listed, CSA certified

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

What's in the Box?

• DLC400BP Time switch
• EPC2 photocell

• Rank: #22932 in BISS
• Brand: NSI Industries
• Model: DLC400BP
• Number of items: 1

• Automatic on/off control for individualized daily operation of four zones
• Digital display with up to 99 on/off cycles each day, one minute-minimum cycle, manual override switch
• Remote photocell included for on/off control
• 120/208-240/277 VAC input voltage, 30 amp SPDT output contacts for each zone
• Metal indoor/outdoor enclosure with locking hasp

NSI Industries C506H Commercial Style Spring Wound Auto Off In-Wall Time Switch, 6 Hours Timer Length, SPST Switch Type

NSI Industries C506H Commercial Style Spring Wound Auto Off In-Wall Time Switch, 6 Hours Timer Length, SPST Switch Type
by NSI Industries

New!: $47.86 $32.79 (as of 03/19/2014 06:10 PST)
2 Used! | New! from $32.79 (as of 03/19/2014 06:10 PST)

Photo Detectors

This NSi Industries C506H spring-wound timed switch accepts 120/277 VAC input and its SPST output contacts can activate a 20 amp load or 2 hp motor. The timer's twist knob sets time from one minute to six hours with an automatic Off. The single-pole single-throw (SPST) contacts are housed within a single-gang in-wall switch with metal cover plate that is suitable for indoor use and is Underwriter Laboratories (UL) Listed and Canadian Standards Association (CSA) certified for quality assurance. This switch is suitable for controlling lighting and fans.

Specifications

Switch type	Spring wound timer with twist knob
Input power supply	120/277 VAC, 50/60 Hz
Output contacts	SPST contacts, 20 amps load rating, 2 hp motor load rating
On/off control	One minute to six hours with auto Off and Hold
Enclosure	Single-gang in-wall, indoor use, metal cover plate
Terminal wire size range	#12 AWG (American wire gauge)
Operating temperature range	32 to +122 degrees F (0 to +50 degrees C)
Standards met	UL Listed, CSA certified

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #16608 in BISS
• Size: #12AWG
• Color: Metal-brushed aluminum
• Brand: NSI Industries
• Model: C506H
• Number of items: 1

• Selectable timed On cycle for use with fans and lights
• Twist knob timed On settings from one minute to 6 hours, auto Off
• 120/277 VAC input voltage for multiple uses
• Single-gang in-wall enclosure for indoor use, metal cover plate

NSI Industries 5004M Delayed Response Utility Grade MOV Surge Arrestor Photocontrol, 2,080-2,770 VA Ballast, 1" Light Sensor, 3,470-4,620 Watt Power, 208-277VAC Voltage, Maroon

NSI Industries 5004M Delayed Response Utility Grade MOV Surge Arrestor Photocontrol, 2,080-2,770 VA Ballast, 1" Light Sensor, 3,470-4,620 Watt Power, 208-277VAC Voltage, Maroon
by NSI Industries

New!: $31.89 $25.10 (as of 03/14/2014 02:17 PST)
2 Used! | New! from $25.10 (as of 03/14/2014 02:17 PST)

Photo Detectors

This NSi Industries 5004M photocontrol accepts 208-277 VAC input, has a 2,080-2,770 VA ballast capability, and can power a 3,470-4,620 watt lamp for applications such as street and highway lighting. The 1" cadmium sulphide photocell turns on lighting when the ambient light level drops below one to three foot candles (fc) and works with screw-base compact fluorescent (CFL) and LED bulbs. The photocell turns lighting off when the level exceeds three foot candles. The metal oxide varistor (MOV)-type surge arrestor reduces electric noise interference. The polypropylene photocell housing is UV stabilized and the clear acrylic window is UV-resistant. This photocontrol unit meets EEI NEMA standards for locking-type photocontrols, is Underwriter Laboratories (UL) Listed for quality assurance, and is suitable for controlling lighting.

Specifications

Photocell type	Cadmium sulphide photo sensor and switch, turn-lock mount, MOV surge arrestor
Input power supply	208-277 VAC, 50/60 Hz
Output	3,470-4,620 watts
On/off control	1-3 fc ambient light, instant On, 3-5 seconds Off delay
Enclosure	Maroon polypropylene, UV stabilized
Mount style	Turn-lock mount
Operating temperature range	-40 to +140 degrees F (-40 to +60 degrees C)
Standards met	UL Listed, CSA certified, ANSI C136.10, EEI NEMA

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #30376 in BISS
• Size: 2080-2770VA
• Color: Maroon
• Brand: NSI Industries
• Model: 5004M
• Number of items: 1

• Cadmium sulphide photocell for on/off control
• MOV-type surge arrestor for surge protection
• Instant On cycle, delay of three to five seconds for Off cycle
• 208-277 VAC input voltage, 2,080-2,770 VA ballast, 3,470-4,620 W output
• Polypropylene housing, UV stabilized

NSI Industries Tork W220 7 Day Time Switch, Different Schedules Each Day, Metal Indoor NEMA 1, 120 VAC Input Supply, DPDT Output Contact

NSI Industries Tork W220 7 Day Time Switch, Different Schedules Each Day, Metal Indoor NEMA 1, 120 VAC Input Supply, DPDT Output Contact
by NSI Industries

New!: $290.41 $185.27 (as of 03/07/2014 23:11 PST)
2 Used! | New! from $185.27 (as of 03/07/2014 23:11 PST)

Photo Detectors

This NSi Industries W220 mechanical time switch accepts 120 VAC input and can activate a 40 amp load or 2 hp motor. The timer includes one pair of contact trippers per day and is suitable for individualized daily operation. The timer has a minimum On cycle time of one hour and a minimum Off cycle time of two hours. A switch allows operation to be skipped for individual days of the week. The double-pole double-throw (DPDT) contacts are housed within a metal enclosure that meets NEMA-1 standards for dust resistance and has a lockable hasp. The enclosure is suitable for indoor use and mounts to an external surface. This mechanical timer is Underwriter Laboratories (UL) listed and Canadian Standards Association (CSA) certified for quality assurance and is suitable for controlling parking lot lighting, HVAC, display lighting, security lighting, lighted signage, and storefront lighting.

Specifications

Switch type	Mechanical 7-day timer, contact trippers for one on/off cycle (included). Accommodates 7 pair additional trippers (not included). Skip-a-day operation.
Input power supply	120 VAC, 60 Hz, 3 W power consumption
Output contacts	DPDT contacts, 40 amp load rating
On/off control	One-hour minimum On cycle, two-hour minimum Off cycle, eight hours minimum between Off cycles.
Enclosure	NEMA-1 metal enclosure for indoor use, external surface mount, lockable hasp
Terminal wire size range	#8 to #14 AWG (American wire gauge)
Operating temperature range	-40 to +165 degrees F (-40 to +74 degrees C)
Standards met	UL Listed, CSA certified

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #25883 in BISS
• Brand: NSI Industries
• Model: W220
• Number of items: 1

• Automatic on/off control for individualized daily operation
• Mechanical 7-day dial with one pair of trippers per day, one hour minimum On cycle and two hour minimum Off cycle, manual override switch
• User-selectable skipping of operations by day
• 120 VAC input voltage, 40 amp DPDT output contacts
• Metal enclosure with locking hasp for indoor use

Tork SS720A - 24 Hr or 7 Day Digital In-Wall Timer - White

Tork SS720A - 24 Hr or 7 Day Digital In-Wall Timer - White
by NSI Industries
(3)

New!: $46.63 $22.89 (as of 03/04/2014 07:09 PST)
4 Used! | New! from $22.89 (as of 03/04/2014 07:09 PST)

Photo Detectors

This NSi Industries SS720A digital time switch accepts 120 VAC input and can activate a 15 amp load, and is suitable for use either for individualized daily operation or in random on/off cycle mode. This timer includes seven pairs of on/off set points and has a minimum cycle time of one minute. A rechargeable nickel metal hydride (Ni-MH) battery (included) provides backup power to maintain time and schedule settings. The single-gang in-wall enclosure with white cover plate is suitable for indoor use. This digital timer is Underwriter Laboratories (UL) Listed for quality assurance and is suitable for use controlling lighting.

Specifications

Switch type	Digital 24-hour timer with seven unique set points each day of the week
Input power supply	120 VAC, 60 Hz, rechargeable Ni-MH battery backup
Output contacts	15 amp resistive load rating
On/off control	One-minute minimum on/off cycle, up to seven cycles per 24 hours
Enclosure	In-wall, white cover plate, indoor use
Terminal wire size range	#14 AWG (American wire gauge)
Operating temperature range	32 to 104 degrees F (0 to 40 degrees C)
Standards met	UL Listed

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #18685 in BISS
• Size: #14AWG
• Color: White
• Brand: NSI Industries
• Model: SS720A
• Number of items: 1

• Automatic on/off control for individualized daily operation
• Digital 24-hour display with seven unique on/off cycles each day, one-minute minimum cycle, manual override switch
• Random on/off cycle mode
• 120 VAC input voltage, 15 amp output contacts
• Single-gang in-wall enclosure for indoor use