NSI Industries Tork 1104-NC 24 Hour Time Switch, Same Day ON/OFF Times Each Day, Noryl Indoor/Outdoor with Clear Lexan cover, 208-277 VAC Input Supply, DPST Output Contact

NSI Industries Tork 1104-NC 24 Hour Time Switch, Same Day ON/OFF Times Each Day, Noryl Indoor/Outdoor with Clear Lexan cover, 208-277 VAC Input Supply, DPST Output Contact
by NSI Industries

New!: $194.41 $79.99 (as of 11/15/2013 08:20 PST)
3 Used! | New! from $79.99 (as of 11/15/2013 08:20 PST)

Photo Detectors

This NSi Industries 1104-NC mechanical time switch accepts 208-277 VAC input and its DPST output contacts can activate a 40 amp load or 5 hp motor, and is suitable for use where on/off operation is required at the same time each day. The timer includes one pair of contact trippers and has a minimum On cycle time of 20 minutes and a minimum Off cycle time of 75 minutes. The timer accommodates up to 12 pairs of contact trippers (not included). The double-pole single-throw (DPST) contacts are housed within a Noryl plastic alloy enclosure with a lockable hasp. The enclosure is suitable for both indoor and outdoor use and mounts to an external surface. This mechanical timer is Underwriter Laboratories (UL) listed and Canadian Standards Association (CSA) certified for quality assurance and is suitable for controlling lighting, heaters, and equipment motors.

Specifications

Switch type	Mechanical 24-hour timer with contact trippers for one on/off cycle (included). Accommodates 11 pair additional trippers (not included).
Input power supply	208-277 VAC, 60 Hz, 3 W power consumption
Output contacts	DPST contacts, 40 amp resistive and tungsten load, 5 hp motor load rating
On/off control	20-minute minimum On cycle, 75-minute minimum Off cycle, up to 12 cycles per 24 hours
Enclosure	Noryl plastic alloy enclosure with clear Lexan cover, indoor/outdoor use, external surface mount
Terminal wire size range	#8 to #14 AWG (American wire gauge)
Operating temperature range	-40 to +165 degrees F (-40 to +74 degrees C)
Standards met	UL Listed, CSA certified

Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.

NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.

• Rank: #29019 in BISS
• Brand: NSI Industries
• Model: 1104-NC
• Number of items: 1

• Automatic on/off control for operation at same time each day
• Mechanical 24-hour dial with one pair of trippers, 20 minutes minimum On cycle and 75 minutes minimum Off cycle, manual override switch
• Accommodates 11 additional pairs of trippers (not included)
• 208-277 VAC input voltage, 40 amp DPST output contacts
• Noryl plastic alloy indoor/outdoor enclosure with locking hasp